Mediatek Usb Vcom Drivers Download For Windows

Mediatek Usb Vcom Drivers Download For Windows | Here's how to download MediaTek USB VCOM driver for your phone. Available as MT65xx preloader and MT67xx preloader drivers, installing these MediaTek USB drivers on your phone will ensure accurate USB data transfer from your phone's computer, and run programs such as SP Flash Tool and more. All MediaTek VCOM drivers are listed first, depending on whether you need an MT65xx driver or an MT67xx driver. You can find out which MTK processor you are using by checking your phone specifications.

MediaTek processors have been under discussion for the past few years. Found in a wide range of devices, the MT65xx and MT67xx series offer high performance and excellent value. If you have a MediaTek phone, you will need to install the MediaTek TechVCO driver to connect the phone to your Windows PC. In most cases, you will need these drivers when you flash the firmware files or install custom ROM or TWRP recovery. Relevant MT drivers are listed according to the media tech chip set type below.

Download the MediaTek USB VCOM driver

Regardless of the manufacturer from which the phone was purchased, if you're using a MediaTek chip set (MT65xx, MT67xx, MT68xx), you'll need the following USB drivers to connect your device to your PC. Will be. The MediaTek Preloader driver confirms that your computer interacts properly with the Android MTK device.


Here's how to download and install the right driver for your MT phone.

Download MediaTek USB VCOM Driver

Regardless of the manufacturer from which the phone was purchased, if you're using a MediaTek chip set (MT65xx, MT67xx, MT68xx), you'll need the following USB drivers to connect your device to your PC. Will be. The MediaTek Preloader driver confirms that your computer interacts properly with the Android MTK device.

Here's how to download and install the right driver for your MTK phone.

How to Install MediaTek  USB VCOM Drivers

  1. The following steps apply to any PC running Windows XP, Windows 7/8/10 or higher. However, in Windows 8 and above, you need to disable driver signature authentication. There are many online guides that show you how to disable digital driver automation so that you can use this driver package before installing it.
  2. Step 2 -  Just right-click on my computer and click "Manage". When a new window appears, select "Device Manager" from the menu that appears on the left.
    Step 3 - The name of your computer will appear at the top. Right-click on the name and select Legacy Hardware.



    Step 4 - A new wizard will appear. Click Next.


    VCOM Driver Installation 1
    Step 5 - From the next menu, select the second option shown in the screenshot below and click Next.



    Step 6 - You will see a long list on the next screen. Select Show all devices and click Next.


    Step 7 - In the next window, click on the hard disk and select the .inf file that you extracted in step 1.


    Step 8 - After making your selection, click Next. A security alert appears where you can choose to install.

    Step 9 - Restart your PC and connect your Meditek MT65xx or MT67xx device.

    that's it! After installing the correct USB drivers on your MediaTek device, you can use other tools to prevent other files from flashing and worrying about data transfer failures.

Post a Comment

0 Comments